Packing List Slow Build Wing Tanks
Jump to navigation
Jump to search
Overview
The Packing List (.pdf) for the QB and SB wings are both downloadable in the Van's Store.
Below is a downloadable and updated packing list: RV-15 Packing Lists (.xlsx)
- Note: The quantities for rivets match the hardware box inventories, not the weight in lbs on the inventory sheet.
- Note: This list is not official, and all quantities and links should be verified.
- Note: This format also matches the KitFlight inventory feature format, you will need to export each tab into a .csv file.
Revisions
SB Sample Order #313196
- The SECTION 21: Fuel Sender Assembly R2 change requires an additional 104 AN426AD3-3.5 rivets and 52 K1000-08D nutplates.
- Supporting Math:
K1000-08D (nutplate, 8-32 dimpled) — Wings and Tanks Section -L -R Total 11 Inboard Rib 5 5 10 18 Lower Skin 6 6 12 Subtotal — tank hardware (matches SB tank inventory) 22 31 Wing Skins 124 124 248 32 Cove Skins 12 12 24 34 Aileron 6 6 12 38 Lens/Hatch 8 – 8 Subtotal — Wing Hardware Bin 2 (matches QB and SB inventory) 292 21 (R2, new) 26 26 52 New Total required 187 179 366
AN426AD3-3.5 (rivet, solid countersunk) — Wings and Tanks Section -L -R Total 11 Inboard Rib 10 10 20 17 Skin Prep 6 6 12 18 Lower Skin 15 15 30 19 Upper Skin 29 29 58 Subtotal — tank hardware (matches SB tank inventory) 120 (~.020 lb) 31 Wing Skins 240 240 480 36 Flap 28 28 56 38 Lens/Hatch 32 – 32 Subtotal — Wing Hardware Bin 3 (matches QB and SB inventory) 568 (~.110 lb) 21 (R2, new) 52 52 104 New Total required 412 380 792 (~.160 lb)
- SECTION 29: D-Cell Nose Ribs requires 60 RIVET LP4-4 but both the QB and SB inventories ship 30 — order 30 more before starting the nose ribs. (VAF)
- Supporting Math:
RIVET LP4-4 (blind) — Wings Section 29 page What it rivets -L -R Total 29-08 ES-00301 tie-wrap clip to W-15008 inbd L.E. rib 1 1 2 29-10 ES-00301 tie-wrap clips to W-15009 ribs 5 5 10 29-12 ES-00301 tie-wrap clips to W-15009 ribs 4 4 8 29-14 ES-00301 tie-wrap clips to W-15009 ribs 2 2 4 29-16 ES-00301 tie-wrap clips to W-15010 ribs 3 3 6 29-17 W-15010 L.E. ribs to wing spar (Step 3) 15 15 30 Total required 30 30 60 Shipped (QB and SB inventory) 30 Short 30
- The SECTION 38: Lens and Hatch Covers Subkit W-15515 should have 18x W-15040-001 and 2x W-15040A-001 rather than the 16 and 4 that are shipped.
- The SECTION 38: Lens and Hatch Covers bushing for the landing light wire (BUSHING SB375-4) does not seem to be supplied with the wing kit or called out in the KAIs. 2 additional (1 left wing, 1 right wing) bushings are required if using the hole for the wire and should be requested from Vans.