SECTION 26: Rear Spar Tank Assembly
Jump to navigation
Jump to search
Before you start:
Build Instruction Updates
- Check for more recent updates here
Videos
- RV-15 Rear Spar & Fuel Tank Assembly — Where Everything Comes Together (Episode 6) — Average Joe's Airspeed Acres
Modifications to Consider
- None
Special Tools / Supplies
General Build Notes
- Review SECTION 21: Fuel Sender Assembly: Highly recommended to install the fuel senders and perform the tank flush BEFORE joining the tank/wing structure. One builder completed the entire left wing first and had to slosh the whole wing to rinse the tank.
Revision History
- R1 - Initial release to builders
Specific Build Notes:
Page 26-06 (R1)
- Rivet callout is for AN470AD4-4 and those are too short. AN470AD4-4.5 are much closer to the proper length and you could probably get away with 4-5 rivets but they would be just slightly long.